Netgear M4100-D12G (GSM5212v1h1) - 10‐port GE + 2 GE Combo L2 Managed PD Switch Guía De Administador
Security Management
213
ProSAFE M4100 Managed Switches
Set the Dynamic and Static Limit on Port 1/0/1
The example is shown as CLI commands and as a Web interface procedure.
CLI: Set the Dynamic and Static Limit on Port 1/0/1
(Netgear Switch) (Config)#port-security
Enable port-security globally
(Netgear Switch) (Config)#interface 1/0/1
(Netgear Switch) (Interface 1/0/1)#port-security
Enable port-security on port 1/0/1
(Netgear Switch) (Interface 1/0/1)#port-security max-dynamic 10
Set the dynamic limit to 10
(Netgear Switch) (Interface 1/0/1)#port-security max-static 3
Set the static limit to 3
(Netgear Switch) (Interface 1/0/1)#ex
(Netgear Switch) (Config)#ex
(Netgear Switch) #show port-security 1/0/1
Admin
Dynamic
Static
Violation
Intf
Mode
Limit Limit
Trap Mode
------
------- ---------- --------- ----------
1/0/1
Disabled
10
3
Disabled
Web Interface: Set the Dynamic and Static Limit on Port 1/0/1
1.
Select Security > Traffic Control > Port Security >Port Administrator.
A screen similar to the following displays.
b. Under Port Security Configuration, next to Port Security Mode, select the Enable
radio button.
c. Click Apply to save the settings.
2.
Set the dynamic and static limit on the port 1/0/1:
a. Select Security > Traffic Control > Port Security >Interface Configuration.