Netgear M4100-D12G (GSM5212v1h1) - 10‐port GE + 2 GE Combo L2 Managed PD Switch Guía De Administador

The example is shown as CLI commands and as a Web interface procedure.

Use the following commands to associate isolated ports 1/0/2-1/0/3 to a private-VLAN 
(primary=100, secondary=101). Community ports 1/0/4-1/0/5 to a private-VLAN (primary=
100, secondary=102).

(Netgear Switch)  #config 

(Netgear Switch)  (Config)#interface 1/0/2-1/0/3

(Netgear Switch)  (Interface 1/0/2-1/0/3)#switchport private-vlan host-association 
100 101

(Netgear Switch)  (Interface 1/0/2-1/0/3)#exit

(Netgear Switch)  (Config)#interface 1/0/4-1/0/5

(Netgear Switch)  (Interface 1/0/4-1/0/5)#switchport private-vlan host-association 
100 102

(Netgear Switch)  (Interface 1/0/4-1/0/5)#end

Associate isolated ports 1/0/2-1/0/3 to a private-VLAN (primary=100, secondary=101).

a. Select Security > Traffic Control > Private VLAN > Private VLAN Host Interface 

Configuration. 

A screen similar to the following displays.

b.  Under Private VLAN Host Interface Configuration, select the 1/0/2 and 1/0/3 

interface check box. 

c.  In the Host Primary VLAN field, enter 100.