Netgear WC7520 - ProSafe 20-AP Wireless Controller Manual De Referencia
Introduction and Overview
12
ProSafe 20-AP Wireless Controller WC7520
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep
the carton, including the original packing materials, in case you need to return the product for
repair.
the carton, including the original packing materials, in case you need to return the product for
repair.
Hardware Features
The front panel ports and LEDs, rear panel components, and bottom label of the wireless
controller are described in this section.
controller are described in this section.
Front Panel Ports and LEDs
The following figure shows the front panel ports and status LEDs of the wireless controller.
Figure 1.
From left to right, the wireless controller’s front panel shows the following ports and LEDs:
•
Power LED
•
Test LED
•
USB port for external storage, for example for more floor heat maps and extended
statistics history
•
Four 10/100/1000 Mbps LAN Ethernet ports with RJ-45 connectors, left LEDs, and right
LEDs. All Ethernet ports provide switched N-way, automatic speed negotiating, auto
MDI/MDIX technology.
MDI/MDIX technology.
Note:
The four ports of the wireless controller function as a single switch.
The function of each LED is described in the following table:
Table 1. LED functions
LED
Status
Description
Power LED
On
The green Power LED should be lit when the wireless controller is on.
Off
If the power LED is not lit when the wireless controller is on, check the
connections and check to see if the power outlet is controlled by a wall switch
that is turned off (see
connections and check to see if the power outlet is controlled by a wall switch
that is turned off (see