Netgear FVS318v1 – Prosafe Wireless N VPN Firewall Manual De Referencia
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
E-6
NETGEAR VPN Configuration of FVS318 or FVM318 to FVL328
M-10146-01
–
From the Local Identity drop-down box, select WAN IP Address (WAN IP address will
automatically be populated into the Local Identity Data field after policy is applied).
automatically be populated into the Local Identity Data field after policy is applied).
–
From the Remote Identity drop-down box, select Remote WAN IP (WAN IP address will
automatically be populated into the Local Identity Data field after policy is applied).
automatically be populated into the Local Identity Data field after policy is applied).
Figure E-5: NETGEAR FVL328 v1.4 IKE Policy Configuration – Part 2
–
From the Encryption Algorithm drop-down box, select 3DES.
–
From the Authentication Algorithm drop-down box, select MD5.
–
From the Authentication Method radio button, select Pre-shared Key.
–
In the Pre-Shared Key field, type hr5xb84l6aa9r6. You must make sure the key is the
same for both gateways.
same for both gateways.
–
From the Diffie-Hellman (DH) Group drop-down box, select Group 1 (768 Bit).
–
In the SA Life Time field, type 28800.
3.
Click the Apply Button. This will bring you back to the IKE Policies Menu.
Figure E-6: NETGEAR FVL328 v1.4 IKE Policies (Post Configuration)
The FVS318 IKE Policy is now displayed in the IKE Policies page.