Netgear FVS318v1 – Prosafe Wireless N VPN Firewall Manual De Referencia

3-8

Connecting the Firewall to the Internet

b.

Click Next and follow the steps in the Setup Wizard for inputting the configuration 
parameters from your ISP to connect to the Internet.

Note: If you choose not to use the Setup Wizard, you can manually configure your 
Internet connection settings by following the procedure 

 

 
Unless your ISP automatically assigns your configuration automatically via DHCP, you 
will need the configuration parameters from your ISP as you recorded them previously in 

c.

When the firewall successfully detects an active Ethernet connection with a broadband 
modem, the firewall’s Internet LED goes on. The Setup Wizard reports which connection 
type it discovered, and displays the appropriate configuration menu. If the Setup Wizard 
finds no connection, you will be prompted to check the physical connection between your 
firewall and the cable or DSL line. 

d.

The Setup Wizard will report the type of connection it finds. The options are:

•

Connections which require a login using PPPoE, DHCP, or Static (Fixed) IP 
connections. For PPTP or Telstra Bigpond Cable broadband, please refer to 

•

Connections which use dynamic IP address assignment.

•

Connections which use fixed IP address assignment.

The procedures for filling in the configuration menu for each type of connection follow 
below.