Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Guía Del Software

Static  - The port-channel is statically maintained.

Dynamic  - The port-channel is dynamically maintained.

Use this command to display the port-channel system priority.

Port mirroring, which is also known as port monitoring, selects network traffic that you can 
analyze with a network analyzer, such as a SwitchProbe device or other Remote Monitoring 
(RMON) probe.

This command configures a probe port and a monitored port for monitor session (port 
monitoring). Use the source interface <slot/port> parameter to specify the interface 
to monitor. Use rx to monitor only ingress packets or use tx to monitor only egress packets. 
If you do not specify an rx or tx option, the destination port monitors both ingress and 
egress packets. 

Logical Interface

Valid slot and port number separated by forward slashes.

Port-Channel 
Name

The name of this port-channel (LAG). You may enter any string of up to 15 alphanumeric 
characters.

Link State

Indicates whether the Link is up or down.

Admin Mode

May be enabled or disabled. The factory default is enabled. 

Type

The status designating whether a particular port-channel (LAG) is statically or 
dynamically maintained. 

Mbr Ports

A listing of the ports that are members of this port-channel (LAG), in slot/port notation. 

There can be a maximum of eight ports assigned to a port-channel (LAG).

Device Timeout

For each port, lists the timeout (long or short) for Device Type (actor or partner).

Port Speed

Speed of the port-channel port.

Ports Active

This field lists the ports that are actively participating in the port-channel (LAG).

Load Balance 
Option 

Local Preference 
Mode

Indicates whether the local preference mode is enabled or disabled. 

Format

show port-channel system priority

Mode

Privileged EXEC