Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Guía Del Software

(NETGEAR Switch) #show ip arp inspection interfaces

 Interface        

Trust State   Rate Limit   Burst Interval                                      

                                   (pps)        (seconds)

 ---------------  -----------   ----------  ---------------   

 0/1                Untrusted           15                1

 0/2                Untrusted           10               10

Use this command to display the configured ARP ACLs with the rules. Giving an ARP ACL 
name as the argument will display only the rules in that ARP ACL.

Privileged EXEC

User EXEC

(NETGEAR Switch) #show arp access-list

ARP access list H2

    permit ip host 1.1.1.1 mac host 00:01:02:03:04:05

    permit ip host 1.1.1.2 mac host 00:03:04:05:06:07

ARP access list H3

ARP access list H4

    permit ip host 2.1.1.2 mac host 00:03:04:05:06:08

This section describes the commands you use to configure IGMP snooping. The software 
supports IGMP Versions 1, 2, and 3. The IGMP snooping feature can help conserve 
bandwidth because it allows the switch to forward IP multicast traffic only to connected hosts 
that request multicast traffic. IGMPv3 adds source filtering capabilities to IGMP versions 1 
and 2.

Rate Limit

The configured rate limit value in packets per second.

Burst Interval

The configured burst interval value in seconds.

Format

show arp access-list [<acl-name>]

Mode