Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Netgear
  4. M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch
  5. Guía Del Software

Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Guía Del Software

Descargar
Página de 578
Switching Commands 
211
 M4100 Series ProSAFE
 Managed
 Switches
MAC Database Commands
This section describes the commands you use to configure and view information about the 
MAC databases.
bridge aging-time
This command configures the forwarding database address aging timeout in seconds. The 
<seconds>
 parameter must be within the range of 10 to 1,000,000 seconds. 
no bridge aging-time
This command sets the forwarding database address aging timeout to the default value. 
SMACDMAC 
Mode
May be enabled or disabled. The factory default is disabled.
TCP Flag Mode
May be enabled or disabled. The factory default is disabled.
TCP FIN&URG& 
PSH Mode
May be enabled or disabled. The factory default is disabled.
TCP Flag & 
Sequence Mode
May be enabled or disabled. The factory default is disabled.
TCP SYN Mode
May be enabled or disabled. The factory default is disabled.
TCP SYN & FIN 
Mode
May be enabled or disabled. The factory default is disabled.
TCP Fragment 
Mode
May be enabled or disabled. The factory default is disabled.
TCP Offset Mode May be enabled or disabled. The factory default is disabled.
Default
300
Format
bridge aging-time <seconds>
Mode
Global Config
Format
no bridge aging-time
Mode
Global Config
Term
Definition