Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Guía Del Software
Quality of Service Commands
272
M4100 Series ProSAFE
Managed
Switches
no diffserv
This command sets the DiffServ operational mode to inactive. While disabled, the DiffServ
configuration is retained and can be changed, but it is not activated. When enabled, DiffServ
services are activated.
configuration is retained and can be changed, but it is not activated. When enabled, DiffServ
services are activated.
DiffServ Class Commands
Use the DiffServ class commands to define traffic classification. To classify traffic, you specify
Behavior Aggregate (BA), based on DSCP and Multi-Field (MF) classes of traffic (name,
match criteria)
Behavior Aggregate (BA), based on DSCP and Multi-Field (MF) classes of traffic (name,
match criteria)
This set of commands consists of class creation/deletion and matching, with the class match
commands specifying Layer 3, Layer 2, and general match criteria. The class match criteria
are also known as class rules, with a class definition consisting of one or more rules to
identify the traffic that belongs to the class.
commands specifying Layer 3, Layer 2, and general match criteria. The class match criteria
are also known as class rules, with a class definition consisting of one or more rules to
identify the traffic that belongs to the class.
Note:
Once you create a class match criterion for a class, you cannot
change or delete the criterion. To change or delete a class match
criterion, you must delete and re-create the entire class.
change or delete the criterion. To change or delete a class match
criterion, you must delete and re-create the entire class.
The CLI command root is class-map.
class-map
This command defines a DiffServ class of type match-all. When used without any match
condition, this command enters the class-map mode. The <class-map-name> is a
case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying an existing
DiffServ class.
condition, this command enters the class-map mode. The <class-map-name> is a
case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying an existing
DiffServ class.
Note:
The class-map-name “default” is reserved and you must not use it.
The class type of match-all indicates all of the individual match conditions must be true for
a packet to be considered a member of the class. This command might be used without
specifying a class type to enter the Class-Map Config mode for an existing DiffServ class.
a packet to be considered a member of the class. This command might be used without
specifying a class type to enter the Class-Map Config mode for an existing DiffServ class.
Format
no diffserv
Mode
Global Config