Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Guía Del Software
Switching Commands
67
M4100 Series ProSAFE
Managed
Switches
show voice vlan
When the interface parameter is not specified, only the global mode of the Voice VLAN is
displayed.
displayed.
When the interface is specified:
Provisioning (IEEE 802.1p) Commands
This section describes the commands you use to configure provisioning, which allows you to
prioritize ports.
prioritize ports.
vlan port priority all
This command configures the port priority assigned for untagged packets for all ports
presently plugged into the device. The range for the priority is 0-7. Any subsequent per port
configuration will override this configuration setting.
presently plugged into the device. The range for the priority is 0-7. Any subsequent per port
configuration will override this configuration setting.
Format
show voice vlan [interface {<slot/port> | all}]
Mode
Privileged EXEC
Term
Definition
Administrative
Mode
The Global Voice VLAN mode.
Term
Definition
Voice VLAN Interface Mode
The admin mode of the Voice VLAN on the interface.
Voice VLAN ID
The Voice VLAN ID
Voice VLAN Priority
The do1p priority for the Voice VLAN on the port.
Voice VLAN Untagged
The tagging option for the Voice VLAN traffic.
Voice VLAN CoS Override
The Override option for the voice traffic arriving on the port.
Voice VLAN Status
The operational status of Voice VLAN on the port.
Format
vlan port priority all <priority>
Mode
Global Config