Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Manual De Usuario
Configure System Information
20
M4100 Series Managed Switch
System Configuration
To do the initial system configuration:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select System
Management
Initial Setup.
8.
In the Admin Password field, enter the new password for the Admin account.
The new password does not display as you type it; only dots are shown to hide the entry.
The password is from 8 to 64 alphanumeric characters in length and is case-sensitive.
The password is from 8 to 64 alphanumeric characters in length and is case-sensitive.
9.
In the Enable Password field, enter the new password for the enable mode in the
command line interface.
command line interface.
The new password does not display as you type it; only dots are shown to hide the entry.
The password is from 8 to 64 alphanumeric characters in length and is case-sensitive.
The password is from 8 to 64 alphanumeric characters in length and is case-sensitive.
10.
Enter the System Name, the name to identify this switch.
You can use a name up to 255 characters in length. The factory default is blank.
11.
Enter the System Location, the location of the switch.