Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Manual De Usuario

Different . 

  Some applications that can be selected in this screen require that the 

source interface be configured separately. In this case, the Different option is 
shown.

By default VLAN 1 is used as the source interface.

Click the APPLY button.

The settings are sent to the switch. Configuration changes take effect immediately. These 
changes are not retained across a power cycle unless you save the configuration. See 

405.

The following table describes the status information the System screen displays.System 
Information

Product Name

The product name of this switch.

IPv4 Management VLAN Interface The IPv4 address and mask assigned to the management VLAN 

interface.

Management VLAN ID

The management VLAN ID of the switch. Click the displayed 
Management VLAN ID value to jump to the VLAN screen.

IPv4 Loopback Interface

The IPv4 address and mask assigned to the loopback interface.

System Date

The current date.

System Up time

The time in days, hours, and minutes since the last switch reboot.

Current SNTP Sync Status

Displays the current SNTP sync status. 

System SNMP OID

The base object ID for the switch's enterprise MIB.

System Mac Address

Universally assigned network address.

Supported Java plug-in Version

The supported version of Java plug-in.

Current SNTP Synchronized Time

Displays the SNTP synchronized time.

You can view the fan status, temperature status, device status, and switch statistics.

You can view the status of the fans in all units. These fans remove the heat generated by the 
power, CPU, and other chipsets, and allow the chipsets work normally.