Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Manual De Usuario

Use Static Flag to determine whether the ARP packet needs validation using the DHCP 
snooping database in case ARP ACL rules don't match. 

If the flag is enabled, then the ARP packet is validated by the ARP ACL rules only. If the 
flag is disabled, then the ARP packet needs further validation using the DHCP snooping 
entries. The factory default is Disable.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 
example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 
the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Select Security 





 DAI Interface Configuration.

Use Interface to selects the physical interface.

Use Trust Mode to indicate whether the interface is trusted for dynamic ARP Inspection 
purposes. 

When set to Disable, ARP packets coming to this interface are subjected to ARP 
inspection. If enabled, ARP packets coming to this interface are forwarded without