Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Manual De Usuario

Select System > Management > Management Interfaces > IPv6 Network Neighbor 
Table. 

The following table displays IPv6 Network Interface Neighbor Table information.

IPv6 address

The Ipv6 address of a neighbor switch visible to the network interface.

MAC address

The MAC address of a neighbor switch.

IsRtr

True (1) if the neighbor machine is a router, false (2) otherwise.

Neighbor State

The state of the neighboring switch: 

reachable (1). The neighbor is reachable by this switch. 

stale (2). Information about the neighbor is scheduled for deletion. 

delay (3). No information was been received from neighbor during 
delay period. 

probe (4). Switch is attempting to probe for this neighbor. 

unknown (6). Unknown status.

Last Updated

The last sysUpTime that this neighbor was updated.

For you to manage the device by using the web-based configuration utility, the device 
management IP address must be defined and known. A management VLAN interface is 
created by default and it is assigned an IP address if a DHCP server is present. If it fails to 
get an IP address, a fallback address 169.254.100.100/255.255.0.0 is assigned to it. 
Management VLAN is used as the default source interface for the syslog, message log, and 
SNMP client, and so on The network interface is disabled by default.

The management VLAN is the logical interface used for in-band connectivity with the switch 
through any of the switch’s front panel ports. The configuration parameters associated with 
the switch’s management VLAN do not affect the configuration of the front panel ports 
through which traffic is switched or routed.

To access the switch over a network, you must first configure it with IP information (IP 
address, subnet mask). You can configure the IP information using any of the following:

DHCP

Terminal interface through the EIA-232 port.