Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Manual De Usuario

By default, VLAN 1 is used as source interface.

To specify the DNS server to which the switch sends DNS queries, enter an IP address in 
standard IPv4 dot notation in the DNS Server Address and click the ADD button. 

The server appears in the list. You can specify up to eight DNS servers. The precedence 
is set in the order created. 

To remove a DNS server from the list, select the check box next to the server and click the 
DELETE button. 

If no DNS server is specified, the check box is global and deletes all the DNS servers 
listed.

Click the APPLY button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

To add the specified DNS server to the List of DNS Servers, click the ADD button.

Configuration changes take effect immediately.

To delete the specified DNS server from the list of DNS servers, click the DELETE button. 

If no DNS server is specified, then all the DNS Servers are deleted.

You can manually map host names to IP addresses or view dynamic DNS mappings. 



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 
example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 
the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.