Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Guía De Administador
CoS Queuing
139
ProSAFE M4100 Managed Switches
A screen similar to the following displays.
b. In the Queue ID list, select 1.
c. Under Interface Queue Configuration, scroll down and select the interface 1/0/2
check box.
Now 1/0/2 appears in the Interface field at the top.
d. Enter the following information:
•
In the Minimum Bandwidth field, enter 25.
•
In the Scheduler Type list, select Strict.
e. Click Apply to save the settings.
Set CoS Trust Mode for an Interface
The example is shown as CLI commands and as a Web interface procedure.
CLI: Set CoS Trust Mode for an Interface
(Netgear Switch) (Interface 1/0/3)#classofservice trust?
dot1p Sets the Class of Service Trust Mode of an Interface
to 802.1p.
ip-dscp Sets the Class of Service Trust Mode of an Interface
to IP DSCP.
(Netgear Switch) (Interface 1/0/3)#classofservice trust dot1p?
<cr> Press Enter to execute the command.
(Netgear Switch) (Interface 1/0/3)#classofservice trust dot1p