Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Guía De Administador
Security Management
216
ProSAFE M4100 Managed Switches
Web Interface: Create a Static Address
1.
Select Security > Traffic Control > Port Security > Static MAC address.
A screen similar to the following displays.
2.
Under Port List, in the Interface list, select 1/0/1.
3.
In the Static MAC Address section of the screen, enter the following information:
•
In the Static MAC Address field, enter 00:13:00:01:02:03.
•
In the Vlan ID list, select 3.
4.
Click Add.
Protected Ports
This section describes how to set up protected ports on the switch. Some situations might
require that traffic is prevented from being forwarded between any ports at Layer 2 so that
one user cannot see the traffic of another user on the same switch. Protected ports can:
require that traffic is prevented from being forwarded between any ports at Layer 2 so that
one user cannot see the traffic of another user on the same switch. Protected ports can:
•
Prevent traffic from being forwarded between protected ports.
•
Allow traffic to be forwarded between a protected port and a non-protected port.
In following example, PC 1 and PC 2 can access the Internet as usual, but PC 1 cannot see
the traffic that is generated by PC 2, that is, no traffic is forwarded between PC 1 and PC 2.
the traffic that is generated by PC 2, that is, no traffic is forwarded between PC 1 and PC 2.