Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Guía De Administador
SNTP
265
ProSAFE M4100 Managed Switches
Set the Time Zone
This example is provided for the CLI only.
The SNTP/NTP server is set to Coordinated Universal Time (UTC) by default. The following
example shows how to set the time zone to Pacific Standard Time (PST), which is 8 hours
behind GMT/UTC.
example shows how to set the time zone to Pacific Standard Time (PST), which is 8 hours
behind GMT/UTC.
(Netgear switch)(config)#clock timezone PST -8
Set the Named SNTP Server
The example is shown as CLI commands and as a Web interface procedure.
CLI: Set the Named SNTP Server
NETGEAR provides SNTP servers accessible by NETGEAR devices. Because NETGEAR
might change IP addresses assigned to its time servers, it is best to access an SNTP server
by DNS name instead of using a hard-coded IP address. The public time servers available
are time-a, time-b, and time-c.
might change IP addresses assigned to its time servers, it is best to access an SNTP server
by DNS name instead of using a hard-coded IP address. The public time servers available
are time-a, time-b, and time-c.
Enable a DNS name server and access a time server with the following commands:
(Netgear switch) (config)#ip domain-lookup
(Netgear switch) (config)#ip name-server 192.168.1.1
(Netgear switch) (config)#sntp server time-a.netgear.com
where 192.168.1.1 is the public network gateway IP address for your device.
This method of setting DNS name look-up can be used for any other applications that require
a public IP address, for example, a RADIUS server.
a public IP address, for example, a RADIUS server.
Web Interface: Set the Named SNTP Server
1.
Configure the SNTP server.
a. Select System > Management > Time > SNTP Server Configuration.