Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Guía De Administador

LAGs

ProSAFE M4100 Managed Switches

Enable Both LAGs

The example is shown as CLI commands and as a Web interface procedure.

CLI: Enable Both LAGs

By default, the system enables link trap notification.

(Console) #config

(Console) (Config)#port-channel adminmode all

(Console) (Config)#exit

At this point, the LAGs could be added to VLANs.

Web Interface: Enable Both LAGs

a. Select Switching > LAG > LAG Configuration.

A screen similar to the following displays.

b. Select the top check box and the check boxes for lag_10 and lag_20 are selected.

c. In the Admin Mode field, select Enable.

d. Click Apply to save the settings.