Netgear RN31664E – ReadyNAS 316 6-Bay, 6x4TB Enterprise Drive Manual De Hardware
EDA 500 Disk Tray
The following figure shows the features of the EDA 500 disk tray. The EDA 500 disk tray and the standard
disk tray are the same, except for the EMI shielding on the EDA 500 disk tray. For this reason, use only
EDA 500 disk trays with the EDA 500.
disk tray are the same, except for the EMI shielding on the EDA 500 disk tray. For this reason, use only
EDA 500 disk trays with the EDA 500.
Figure 44. EDA 500 disk tray
1.
Disk tray
2.
Disk tray release latch
3.
Recessed disk tray handle lock
4.
Disk tray handle
5.
Disk screw holes
6.
Mounting bracket
7.
Bracket lock
8.
EMI shielding
IMPORTANT:
Use only EDA 500 disk trays with the EDA 500. Do not use standard disk trays
with the EDA 500.
To maintain adequate airflow, make sure that all disk trays remain in the drive
bays, even if no disk is installed in the tray.
with the EDA 500.
To maintain adequate airflow, make sure that all disk trays remain in the drive
bays, even if no disk is installed in the tray.
Supported Disks
Use only supported SATA hard disk drives (HDD) or solid state drives (SSD) in your ReadyNAS storage
system. If you use disks that are not supported, NETGEAR technical support will not provide assistance.
For a list of supported disks, see the NETGEAR Hardware Compatibility List at
system. If you use disks that are not supported, NETGEAR technical support will not provide assistance.
For a list of supported disks, see the NETGEAR Hardware Compatibility List at
Disks
117
ReadyNAS OS 6.5