Netgear RN31664E – ReadyNAS 316 6-Bay, 6x4TB Enterprise Drive Manual De Hardware

Press this button to turn on the ReadyNAS. The LED indicates these states:

On. Powered on.

Blinking. Booting or shutting down.

Off. Powered off.

Power button and LED

An LED on the front panel of the storage system is associated with each drive bay
The disk LEDs indicate these states:

On. Power is on and the disk is operating normally.

Blinking. The disk was removed, failed, or is resynchronizing. See the display
screen for details.

Off. The drive bay is empty.

Disk LEDs (1, 2)

The disk activity LED indicates these states:

Blinking. A disk is active.

Off. disk is idling.

Disk activity LED

Two LED status indicators are built into each port, one off or green and one showing
three states: off, amber, or green. They indicate port speed and activity as follows:

Green, green. 1000 Mbps connection speed, no activity.

Green blinking, green. 1000 Mbps connection speed, activity.

Green, amber. 100 Mbps connection speed, no activity.

Green blinking, amber. 100 Mbps connection speed, activity.

Green on, off. 10 Mbps connection speed, no activity.

Green blinking, off. 10 Mbps connection speed, activity.

Off, off. No connection.

Rear panel Ethernet port
LEDs

This section describes how to power on and shut down your system. If you must shut down the system, use
one of the preferred shutdown methods whenever possible.