Netgear RN31664E – ReadyNAS 316 6-Bay, 6x4TB Enterprise Drive Guía Del Software

for disks to spin up. In some file server applications, a 10-second delay might be acceptable. For databases,
virtualization, and many applications, the delay might cause the application or host operating system to time
out and return an error.

The energy saved depends on model, but a common figure is that a drive uses 5.3W during read/write
operations, 3.4W while idle, and only 0.4W while in standby or sleep mode.

Hourly snapshots are not taken for spun-down disks, but daily snapshots are taken.

Allowing disks to slow or spin down when not being actively used can potentially save power and extend
the life of the disks, but this can also slow effective read/write speeds and can make the disks appear to be
off-line or cause time outs.

Log in to your ReadyNAS system.

Select System > Power.
The page updates showing the power settings.

If not already expanded, expand Disk Spin-down.

Select the Enable disk spin-down check box to enable spin-down, or, if it is enabled, clear the check
box to disable it.

If spin-down is enabled, use the minutes of inactivity menu to select a delay of between 5 minutes
and 240 minutes of inactivity before the disks spin down.