Netgear FVS318N – Prosafe Wireless N VPN Firewall Prospecto
Overview of the Show Commands
259
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Administrative and Monitoring Settings (System Mode)
Show Commands
Show Commands
Enter the show system ? command at the CLI prompt to display the submodes in the show
system mode. The following table lists the submodes and their commands in alphabetical
order:
system mode. The following table lists the submodes and their commands in alphabetical
order:
firewall
(continued)
(continued)
Display the session limit settings.
Display the session time-out settings.
porttriggering_rules
Display the port triggering rules.
Display the port triggering status.
schedules
Display the configured schedules.
services
Display the configured custom services.
upnp
Display the UPnP portmap table.
Display the UPnP configuration.
Table 16. Show commands: show system mode
Submode
Command Name
Purpose
not applicable
Display system information, including MAC
addresses, serial number, and firmware
version.
addresses, serial number, and firmware
version.
Display the firmware version.
logging
Display the configuration and the schedule
of the email logs.
of the email logs.
Display the configuration of the IPv4 and
IPv6 logs.
IPv6 logs.
logs
Display the system logs.
remote_management
Display the configuration of remote
management for Telnet and HTTPS access.
management for Telnet and HTTPS access.
snmp
Display the SNMP system configuration of
the SNMP agent and the SNMP system
information of the wireless VPN firewall.
the SNMP agent and the SNMP system
information of the wireless VPN firewall.
Display the SNMP trap configuration of the
SNMP agent.
SNMP agent.
status
Display the system status information.
Table 15. Show commands: show security mode (continued)
Submode
Command Name
Purpose