Netgear FVS318N – Prosafe Wireless N VPN Firewall Manual De Referencia

Enter the settings as described in the following table:

Click Apply to save your changes and add the new IPv6 address pool to the List of IPv6 

Address Pools table on the DMZ Setup (IPv6) screen.



91), click the Edit button in 

the Action column for the address pool that you want to modify. The DMZ IPv6 Config 
screen displays.

Modify the settings as described in the previous table.

Click Apply to save your settings.



On the DMZ Setup screen for IPv6 (see 

the left of each address pool that you want to delete, or click the Select All table button 
to select all address pools.

Click the Delete table button.

If you do not configure stateful DHCPv6 for the DMZ but use 
stateless DHCPv6, you need to configure the Router Advertisement 
Deamon (RADVD) and advertisement prefixes.

The RADVD is an application that uses the Neighbor Discovery Protocol (NDP) to collect 
link-local advertisements of IPv6 addresses and IPv6 prefixes in the DMZ. The RADVD then 
distributes this information in the DMZ, which allows IPv6 clients to configure their own IPv6 
address. 

Hosts and routers in the LAN use NDP to determine the link-layer addresses and related 
information of neighbors in the LAN that can forward packets on their behalf. The wireless 
VPN firewall periodically distributes router advertisements (RAs) throughout the DMZ to 

Start IPv6 Address

Enter the start IP address. This address specifies the first of the contiguous 
addresses in the IP address pool. Any new DHCPv6 client joining the DMZ is 
assigned an IP address between this address and the end IP address.

End IPv6 Address

Enter the end IP address. This address specifies the last of the contiguous 
addresses in the IP address pool. Any new DHCPv6 client joining the DMZ is 
assigned an IP address between the start IP address and this IP address.

Prefix Length

Enter the IPv6 prefix length, for example, 10 or 64.