Netgear GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE Guía De Administador

c.  Click Add.

Create a static route with IP address 192.168.30.0/24:

a. Select Routing > Routing Table > Basic > Route Configuration. A screen similar to 

the following displays.

b.  Under Configure Routes, make the following selection and enter the following 

information:

In the Route Type field, select Static.

In the Network Address field, enter 192.168.30.0.

In the Subnet Mask field, enter 255.255.255.0.

In the Next Hop IP Address field, enter 192.168.200.1.

c.  Click Add.

Use ACLs to Configure Isolated VLANs on a Layer 3 Switch

This example shows how to isolate VLANs on a Layer 3 switch by using ACLs. In this 
example, PC 1 is in VLAN 24, PC 2 is in VLAN 48, and the server is in VLAN 38. PC 1 and