Netgear GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE Guía De Administador
Chapter 13. IGMP Snooping and Querier
|
225
ProSafe 7000 Managed Switch Release 8.0.3
Show IGMP Querier Status
The example is shown as CLI commands and as a Web interface procedure.
CLI: Show IGMP Querier Status
To see the IGMP querier status, use the following command.
(Netgear Switch) #show igmpsnooping querier vlan 1
VLAN 1 : IGMP Snooping querier status
----------------------------------------------
IGMP Snooping Querier VLAN Mode................ Enable
Querier Election Participate Mode.............. Disable
Querier VLAN Address........................... 0.0.0.0
Operational State.............................. Disabled
Operational version............................ 2
The command shows that the IGMP admin mode is Active. The mode is controlled by the set
igmp command. If the mode is inactive, no query packet is sent.
igmp command. If the mode is inactive, no query packet is sent.
Web Interface: Show IGMP Querier Status
1.
Select Switching > Multicast > IGMP Snooping Configuration. A screen similar to
the following displays.
the following displays.
2.
Click Refresh.