Netgear GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE Guía De Administador
Chapter 14. Security Management
|
233
ProSafe 7000 Managed Switch Release 8.0.3
Web Interface: Configure a Protected Port to Isolate Ports on
the Switch
the Switch
1.
Create a DHCP pool:
Note:
This example assumes that the DHCP service is enabled. For
information about how to enable the DHCP service, see the Web
interface procedure in
interface procedure in
333.
a. Select System > Services > DHCP Server > DHCP Server Configuration. A screen
similar to the following displays.
b. Under DHCP Pool Configuration, enter the following information:
•
In the Pool Name field, select Create.
•
In the Pool Name field, enter pool-a.
•
In the Type of Binding field, select Dynamic.