Netgear GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE Guía De Administador
Chapter 15. SNTP
|
277
ProSafe 7000 Managed Switch Release 8.0.3
•
Iin the Server Type field, select IPV4 .
•
In the Address field, enter 208.14.208.19.
•
In the Port field, enter 123.
•
In the Priority field, enter 1.
•
In the Version field, enter 4.
c. Click Add.
2.
Configure SNTP globally.
a. Select System > Management > Time > SNTP Global Configuration. A screen
similar to the following displays.
b. Enter the following information:
•
For Client Mode, Select the Unicast radio button.
•
In the Time Zone Name field, enter PST.
•
In the Offset Hours field, enter -8.
c. Click Apply.
Set the Time Zone (CLI Only)
The SNTP/NTP server is set to Coordinated Universal Time (UTC) by default. The following
example shows how to set the time zone to Pacific Standard Time (PST), which is 8 hours
behind GMT/UTC.
example shows how to set the time zone to Pacific Standard Time (PST), which is 8 hours
behind GMT/UTC.
(Netgear switch)(config)#clock timezone PST -8
Set the Named SNTP Server
The example is shown as CLI commands and as a Web interface procedure.