Netgear GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE Guía De Administador

The following example shows how to configure the NETGEAR switch shown in the preceding 
figure to add a double VLAN tag for traffic going from the subnet domain connected to port 
1/0/24. This example assumes there is a Layer 2 switch connecting all these devices in your 
domain. The Layer 2 switch tags the packet going to the NETGEAR switch port 1/0/24. The 
example is shown as CLI commands and as a Web interface procedure. 

CLI: Enable a Double VLAN

Create a VLAN 200.

(Netgear Switch)#vlan database

(Netgear Switch) (Vlan)#vlan 200

(Netgear Switch) (Vlan)#exit

Add interface 1/0/24 to VLAN 200, add pvid 200 to port.

(Netgear Switch) #config 

(Netgear Switch) (Config)#interface 1/0/24 

(Netgear Switch) (Interface 1/0/24)#vlan pvid 200 

(Netgear Switch) (Interface 1/0/24)#vlan participation include 200 

(Netgear Switch) (Interface 1/0/24)#exit

Add interface 1/0/48 to the VLAN 200 in a tagging mode.

(Netgear Switch) (Config)#interface 1/0/48

(Netgear Switch) (Interface 1/0/48)#vlan participation include 200

(Netgear Switch) (Interface 1/0/48)#vlan tagging 200

(Netgear Switch) (Interface 1/0/48)#exit

Select interface 1/0/48 as the provider port.

(Netgear Switch) (Config)#

(Netgear Switch) (Config)#interface 1/0/48

(Netgear Switch) (Interface 1/0/48)#mode dvlan-tunnel

(Netgear Switch) (Interface 1/0/48)#exit

Web Interface: Enable a Double VLAN

Create static VLAN 200: