Netgear GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE Guía De Administador
60
|
Chapter 6. RIP
ProSafe 7000 Managed Switch Release 8.0.3
6.
Click Apply to save the settings.
VLAN Routing with RIP
Routing Information Protocol (RIP) is one of the protocols that routers can use to exchange
network topology information. It is characterized as an interior gateway protocol, and is
typically used in small to medium-sized networks.
network topology information. It is characterized as an interior gateway protocol, and is
typically used in small to medium-sized networks.
Layer 3 switch
Router
VLAN 10
VLAN 20
Port 1/0/2 VLAN
Router port 1/3/1
192.150.3.1
Router port 1/3/1
192.150.3.1
Router port 1/0/5
192.150.4.1
192.150.4.1
Port 1/0/3 VLAN
Router port 1/3/2
192.150.4.1
Router port 1/3/2
192.150.4.1
Layer 2
switch
switch
Layer 2
switch
switch
Figure 8. VLAN routing RIP configuration example
This example adds support for RIPv2 to the configuration created in the base VLAN routing
example. A second router, using port routing rather than VLAN routing, has been added to
the network.
example. A second router, using port routing rather than VLAN routing, has been added to
the network.
CLI: Configure VLAN Routing with RIP Support
1.
Configure VLAN routing with RIP support on a 7000 Series Managed Switch.
(Netgear Switch) #vlan data
(Netgear Switch) (Vlan)#vlan 10
(Netgear Switch) (Vlan)#vlan 20
(Netgear Switch) (Vlan)#vlan routing 10
(Netgear Switch) (Vlan)#vlan routing 20
(Netgear Switch) (Vlan)#exit
(Netgear Switch) #conf