Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Netgear
  4. GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE
  5. Guía De Administador

Netgear GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE Guía De Administador

Descargar
Página de 486
(Netgear Switch) (Config)#ex
(Netgear Switch) #show ip ospf neighbor interface all
  Router ID       IP Address    Neighbor Interface    State
----------------   -----------   -------------------   ---------
4.4.4.4            192.168.10.2       2/0/11           Full       
2.2.2.2            192.168.20.2       2/0/19           Full          
(Netgear Switch) #show ip route
Total Number of Routes......................... 4
   Network          Subnet                    Next Hop     Next Hop
   Address           Mask         Protocol     Intf       IP Address
--------------- --------------- ------------  ---------  --------------- 
14.1.1.0        255.255.255.0   OSPF Inter    2/0/11     192.168.10.2    
14.1.2.0        255.255.255.0   OSPF Inter    2/0/11     192.168.10.2   192.168.10.0  
  255.255.255.0   Local         2/0/11     192.168.10.1    
192.168.20.0    255.255.255.0   Local         2/0/19     192.168.20.1    
  Chapter 7.  OSPF
 
   
|
     
77
ProSafe 7000 Managed Switch Release 8.0.3 
Web Interface: Configure Area 1 as a Stub Area on A1
1. 
Enable IP routing on the switch.
a. Select Routing > IP > Basic > IP Configuration. A screen similar to the following 
displays.
b.  For Routing Mode, select the Enable radio button.
c.  
Click Apply to save the settings.
2. 
Assign IP address 192.168.10.1 to port 2/0/11.
a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to 
the following displays.