Netgear GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE Manual De Usuario
Chapter 4. Routing
|
371
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Admin Boundary Configuration
The definition of an administratively scoped boundary is a mechanism to stop the ingress and
egress of multicast traffic for a given range of multicast addresses on a given routing
interface.
egress of multicast traffic for a given range of multicast addresses on a given routing
interface.
To display the Admin Boundary Configuration page, click Routing
Multicast
Admin
Boundary Configuration.
1.
Use Interface to select the router interface for which the administratively scoped
boundary is to be configured.
boundary is to be configured.
2.
Use Group IP to enter the multicast group address for the start of the range of addresses to
be excluded. The address must be in the range of 239.0.0.0 through 239.255.255.255.
be excluded. The address must be in the range of 239.0.0.0 through 239.255.255.255.
3.
Use Group Mask to enter the mask to be applied to the multicast group address. The
combination of the mask and the Group IP gives the range of administratively scoped
addresses for the selected interface.
combination of the mask and the Group IP gives the range of administratively scoped
addresses for the selected interface.
4.
Click ADD to add a new administratively scoped boundary.
5.
Click DELETE to delete the administratively scoped boundary selected.
IPv6 Multicast
From the IPv6 Multicast link, you can access the following pages: