Netgear GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE Manual De Usuario
598
|
Chapter 8. Maintenance
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Ping IPv6
This screen is used to send a Ping request to a specified Hostname or IPv6 address. You can
use this to check whether the switch can communicate with a particular IPv6 station. Once
you click the Apply button, the switch will send three pings and the results will be displayed
below the configurable data. The output will be Send count=3, Receive count=n from (IPv6
Address). Average round trip time = n ms.
use this to check whether the switch can communicate with a particular IPv6 station. Once
you click the Apply button, the switch will send three pings and the results will be displayed
below the configurable data. The output will be Send count=3, Receive count=n from (IPv6
Address). Average round trip time = n ms.
To access the Ping IPv6 page, click Maintenance
Troubleshooting
Ping IPv6.
1.
Use Ping to select either global IPv6 Address, Hostname, or Link Local Address to ping.
2.
Use IPv6 Address/Hostname to enter the IPv6 address or Hostname of the station you
want the switch to ping. The initial value is blank. The IPv6 Address or Hostname you enter
is not retained across a power cycle.
want the switch to ping. The initial value is blank. The IPv6 Address or Hostname you enter
is not retained across a power cycle.
3.
Use Datagram Size to enter the datagram size. The valid range is (48 to 2048).