Netgear WAC730- ProSAFE® Business 3 x 3 Dual Band Wireless-AC Access Point Manual De Usuario

You can use the Reset button located on the rear of the access point to reset all settings to 
their factory defaults. This is called a hard reset. 

To perform a hard reset, use a sharp object to press and hold the Reset button for 
approximately five seconds (until the Test LED blinks rapidly). This returns the access point 
to the factory configuration settings that are shown in the following table.

802.11 a-na-ac 
encryption

WPA-PSK & WPA2-PSK

AES

TKIP

Network management

Remote configuration and management through the web management 
interface, through SNMP, or through Telnet or SSH with the command-line 
interface (CLI).

SNMP management supports SNMP MIB II, 802.11 MIB and proprietary 
configuration MIB.

Maximum clients

Limited by the amount of WiFi network traffic generated by each node; a maximum 
of 400 clients is supported.

Status LEDs

Power/Test LED

Activity LED

Ethernet LAN

WiFi LAN (2.4 GHz and 5 GHz)

Power adapter

12 VDC, 2.5A; plug is localized to country of sale

Physical specifications

Dimensions (h x w x d): 197.3 x 197.3 x 40 mm (7.76 x 7.76 x 1.57 in.)

Weight: 762 g (1.6 lb)

Environmental 
specifications

Operating temperature: 0 to 40°C (32 to 131°F)
Operating humidity: 10–90%, noncondensing

Electromagnetic 
compliance

FCC Part 15 SubPart B

FCC Part 15 SubPart C

FCC Part 15 SubPart E

CE

C-TICK