Netgear M4100-D12G (GSM5212v1h1) - 10‐port GE + 2 GE Combo L2 Managed PD Switch Guía Del Software

Use this command to configure the persistent logging for the switch. You can specify the 
<severitylevel>

 value as either an integer from 0 to 7 or symbolically through one of the 

following keywords: emergency (0), alert (1), critical (2), error (3), warning (4), 
notice

 (5), info (6), or debug (7).

Use this command to disable the persistent logging in the switch.

This command enables email alerting and sets the lowest severity level for which log 
messages are emailed. If you specify a severity level, log messages at or above this severity 
level, but below the urgent severity level, are emailed in a non-urgent manner by collecting 
them together until the log time expires. You can specify the <severitylevel> value as 
either an integer from 0 to 7 or symbolically through one of the following keywords: 
emergency

 (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), 

or debug (7).

Number of Traps 
Since Last Reset

The number of traps since the last boot.

Trap Log 
Capacity

The number of traps the system can retain.

Number of Traps 
Since Log Last 
Viewed

The number of new traps since the command was last executed.

Log

The log number.

System Time Up

How long the system had been running at the time the trap was sent.

Trap

The text of the trap message.

Default

Disable

Format

logging persistent <severitylevel>

Mode

Global Config

Format

no logging persistent

Mode

Global Config