Netgear M4100-D12G (GSM5212v1h1) - 10‐port GE + 2 GE Combo L2 Managed PD Switch Guía Del Software

This section describes the commands you use to help troubleshoot connectivity issues and to 
restore various configurations to their factory defaults.

Use the this command to discover the routes that packets actually take when traveling to 
their destination through the network on a hop-by-hop basis. Traceroute continues to provide 
a synchronous response when initiated from the CLI.

count: 3 probes

interval: 3 seconds

size: 0 bytes

port: 33434

maxTtl: 30 hops

maxFail: 5 probes

initTtl: 1 hop

Using the options described below, you can specify the initial and maximum time-to-live 
(TTL) in probe packets, the maximum number of failures before termination, the number of 
probes sent for each TTL, and the size of each probe. 

Email Alert 
Security Protocol

The security protocol (TLS or none) the switch uses to authenticate with the SMTP 
server.

Email Alert 
Username

The username the switch uses to authenticate with the SMTP server.

Email Alert 
Password

The password the switch uses to authenticate with the SMTP server.

Default

Format

traceroute {<ip-address> | <hostname>} [initTtl <initTtl>] [maxTtl 

<maxTtl>] [maxFail <maxFail>] [interval <interval>] [count <count>] 

[port <port>] [size <size>] [source {<ip-address> | <slot/port> | 

loopback <0-7>}]

Mode

Privileged EXEC

{<ip-address> | <hostname>}

The <ip-address> value must be a valid IP address. The 
<hostname>

 value must be a a valid host name.

[initTtl <initTtl>]

As an option, specify the initial time-to-live (TTL), the maximum 

number of router hops between the local and remote system. 
Range is 0–255.

[maxTtl <maxTtl>]

As an option, specify the maximum TTL. Range is 1–255.