Netgear M4100-D12G (GSM5212v1h1) - 10‐port GE + 2 GE Combo L2 Managed PD Switch Guía Del Software

This section describes the commands you use to configure SSH access to the switch. Use 
SSH to access the switch from a remote management host.

The system allows a maximum of five SSH sessions.

Use this command to enable SSH access to the system. (This command is the short form of 
the ip ssh server enable command.)

Use this command to set or remove protocol levels (or versions) for SSH. Either SSH1 (1), 
SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set.

Use this command to enable the IP secure shell server.

Use this command to disable the IP secure shell server.

Default

disabled

Format

ip ssh

Mode

Privileged EXEC

Default

1 and 2

Format

ip ssh protocol [1] [2]

Mode

Privileged EXEC

Default

disabled

Format

ip ssh server enable

Mode

Privileged EXEC

Format

no ip ssh server enable

Mode

Privileged EXEC