Netgear M4100-D12G (GSM5212v1h1) - 10‐port GE + 2 GE Combo L2 Managed PD Switch Guía Del Software

Access Accepts................................ 0

Access Rejects................................ 0

Access Challenges............................. 0

Malformed Access Responses.................... 0

Bad Authenticators............................ 0

Pending Requests.............................. 0

Timeouts...................................... 0

Unknown Types................................. 0

Packets Dropped............................... 0

TACACS+ provides access control for networked devices via one or more centralized 
servers. Similar to RADIUS, this protocol simplifies authentication by making use of a single 
database that can be shared by many clients on a large network. TACACS+ is based on the 
TACACS protocol (described in RFC1492) but additionally provides for separate 
authentication, authorization, and accounting services. The original protocol was UDP based 
with messages passed in clear text over the network. TACACS+ uses TCP to ensure reliable 
delivery and a shared key configured on the client and daemon server to encrypt all 
messages.

Use this command to enable TACACS+ packet debugging.

Use this command to disable TACACS+ packet debugging.

Use this command to configure a TACACS+ server. This command enters into the TACACS+ 
configuration mode. The <ip-address> or <hostname> parameter is the IP address or 
host name of the TACACS+ server. To specify multiple hosts, repeat this command. 

Default

Disabled

Format

debug tacacs packet [receive | transmit]

Mode

Global Config

Format

no debug tacacs packet

Mode

Global Config

Format

tacacs-server host {<ip-address> | <hostname>}

Mode

Global Config