Netgear M4100-D12G (GSM5212v1h1) - 10‐port GE + 2 GE Combo L2 Managed PD Switch Guía Del Software
Using the Command-Line Interface
9
M4100 Series ProSAFE
Managed
Switches
Common Parameter Values
Parameter values might be names (strings) or numbers. To use spaces as part of a name
parameter, enclose the name value in double quotes. For example, the expression “System
Name with Spaces” forces the system to accept the spaces. Empty strings (““) are not valid
user-defined strings. The following table describes common parameter values and value
formatting.
parameter, enclose the name value in double quotes. For example, the expression “System
Name with Spaces” forces the system to accept the spaces. Empty strings (““) are not valid
user-defined strings. The following table describes common parameter values and value
formatting.
Table 2. Parameter Descriptions
•
a
(32 bits)
•
a.b
(8.24 bits)
•
a.b.c
(8.8.16 bits)
•
a.b.c.d
(8.8.8.8)
•
0xn
(CLI assumes hexadecimal format.)
•
0n
(CLI assumes octal format with leading zeros.)
•
n
(CLI assumes decimal format.)
•
FE80:0000:0000:0000:020F:24FF:FEBF:DBCB
•
FE80:0:0:0:20F:24FF:FEBF:DBCB
•
FE80::20F24FF:FEBF:DBCB
•
FE80:0:0:0:20F:24FF:128:141:49:32
{ } curly braces
{choice1 | choice2}
Indicates that you must select a parameter from the
list of choices.
list of choices.
| Vertical bars
choice1 | choice2
Separates the mutually exclusive choices.
[{ }] Braces within
square brackets
[{choice1 | choice2}]
Indicates a choice within an optional element. This
format is used mainly for complicated commands
format is used mainly for complicated commands
Parameter
Description
ipaddr
This parameter is a valid IPv4 address. You can enter the IP address in the following
formats:
formats:
In addition to these formats, the CLI accepts decimal, hexadecimal and octal formats
through the following input formats (where n is any valid hexadecimal, octal or decimal
number):
through the following input formats (where n is any valid hexadecimal, octal or decimal
number):
ipv6-address
This parameter is a valid IPv6 address. You can enter the IP address in the following
formats:
formats:
For additional information, refer to RFC 3513.
Interface or
slot/port
slot/port
Valid slot and port number separated by forward slashes. For example, 0/1 represents slot
number 0 and port number 1.
number 0 and port number 1.
Logical Interface
Represents a logical slot and port number. This is applicable in the case of a port-channel
(LAG). You can use the logical slot/port to configure the port-channel.
(LAG). You can use the logical slot/port to configure the port-channel.
Character strings
Use double quotation marks to identify character strings, for example, “System Name with
Spaces”. An empty string (“”) is not valid.
Spaces”. An empty string (“”) is not valid.
Table 1. Parameter Conventions (continued)
Symbol
Example
Description