Netgear M4100-D12G (GSM5212v1h1) - 10‐port GE + 2 GE Combo L2 Managed PD Switch Manual De Usuario

To change the name of a MAC ACL, select the check box next to the Name field, update the 
name, then click the APPLY button.

To add a new MAC ACL to the switch configuration, click the ADD button.

You can define rules for MAC-based ACLs. The access list definition includes rules that 
specify whether traffic matching the criteria is forwarded normally or discarded. A default 
'deny all' rule is the last rule of every list.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 
example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 
the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Select Security 





 MAC Rules.

Use ID to enter a whole number in the range of 1 to 511.

This number is used to identify the rule. 

In the Action menu, select permit or deny to specify what action is taken if a packet 
matches the rule's criteria.

Use Assign Queue ID to specify the hardware egress queue identifier used to handle all 
packets matching this ACL rule. 

The valid range of queue IDs is 0 to 7. 

Mirror Interface to specify the specific egress interface where the matching traffic stream is 
copied in addition to being forwarded normally by the device.