Netgear M4100-D12G (GSM5212v1h1) - 10‐port GE + 2 GE Combo L2 Managed PD Switch Manual De Usuario
Monitoring the System
384
M4100 Series Managed Switch
8.
Select the Admin Mode Enable radio button.
CLI command logging is enabled.
Configure the Console Log
This allows logging to any serial device attached to the host.
To configure the console log:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Monitoring
Logs > Console Log Configuration.
A log that is disabled does not log messages.
8.
To enable the log, select the Admin Status Enable radio button.
9.
In the Severity Filter list, select a severity level.
A log records messages equal to or above a configured severity threshold. These
severity levels are available:
•
Emergency (0). The system is unusable
•
Alert (1). Action must be taken immediately
•
Critical (2). Critical conditions
•
Error (3). Error conditions
•
Warning (4). Warning conditions