Netgear M4100-D12G (GSM5212v1h1) - 10‐port GE + 2 GE Combo L2 Managed PD Switch Manual De Usuario

In the Direction menu, specify the direction of the traffic to be mirrored from the configured 
mirrored port(s). 

If the value is not configured, it is shown as None. The default value is None. The 
following values are available:

None

 

—

  The value is not configured.

Tx and Rx

 

—

  Monitors transmitted and received packets.

Tx

  —

  Monitors transmitted packets only.

Rx

 

—

  Monitors received packets only.

For VLANs only, the Tx and Rx and None options are applicable. 

Tx and Rx —

  Specify VLAN as the source VLAN.

None —

  Remove the specified source VLAN.

If the VLAN is configured as the source VLAN, its direction is displayed as a blank 
field.

To apply the settings to the system, click the APPLY button.

If the port is configured as a source port, the Mirroring Port field value is Mirrored.

To delete a mirrored port, select the check box next to the mirrored port, and then click the 
DELETE button.

Click the APPLY button.

Your settings are applied to the switch.

You can configure the VLAN to use the remote switched port analyzer (RSPAN) VLAN. 
RSPAN allows you to mirror traffic from multiple source ports (or from all ports that are 
members of a VLAN) from different network devices and send the mirrored traffic to a 
destination port (a probe port connected to a network analyzer) on a remote device. The 
mirrored traffic is tagged with the RSPAN VLAN ID and transmitted over trunk ports in the 
RSPAN VLAN.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 
example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 
the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.