Netgear M4100-D12G (GSM5212v1h1) - 10‐port GE + 2 GE Combo L2 Managed PD Switch Manual De Usuario
Configure System Information
80
M4100 Series Managed Switch
The following table describes the PoE Configuration nonconfigurable fields.
Table 23. Advanced PoE Configuration
Field
Description
Units
Displays the Current PoE Unit. You can change the PoE Unit by
selecting another unit ID listed here.
selecting another unit ID listed here.
Firmware Version
Version of the PoE controller's FW image.
Power Status
Indicates the power status.
Total Power (Main AC)
Displays the total power provided by the MAIN AC power source.
Total Power (RPS)
Displays the total power provided by the redundant power source.
Power Source
Current source of system power (Main AC or RPS).
Threshold Power
System can power up one port, if consumed power is less than this
power. That is, consumed power can be between Nominal and
Threshold Power values. The threshold power value is effected by
changing System Usage Threshold.
power. That is, consumed power can be between Nominal and
Threshold Power values. The threshold power value is effected by
changing System Usage Threshold.
Consumed Power
Total amount of a power that is currently being delivered to all ports.
Configure a PoE Port
To configure a PoE port:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.