Netgear M4100-D12G (GSM5212v1h1) - 10‐port GE + 2 GE Combo L2 Managed PD Switch Manual De Usuario

Click the Login button. 

The web management interface menu displays.

Select System 







 Community Configuration. 

In the Community Name list, select an existing community name or select Create to create 
a new one.

A valid entry is a case-sensitive string of up to 16 characters.

To denote a range of IP addresses that SNMP clients can use to access this device, 
complete the Client Address field and the Client IP Mask field.

If either the Client Address or IP Mask value is 0.0.0.0, access is allowed from any IP 
address. Otherwise, every client's address is ANDed with the mask, as is the Client 

Address, and, if the values are equal, access is allowed. For example, if the Client 
Address and Client IP Mask parameters are 192.168.1.0/255.255.255.0, then any client 

whose address is 192.168.1.0 through 192.168.1.255 (inclusive) is allowed access. To 
allow access from only one station, use a Client IP Mask value of 255.255.255.255, and 
use that machine's IP address for the Client Address.

In the Access Mode list, select Read/Write or Read Only to specify the access level for this 
community.

Use Status to specify the status of this community by selecting Enable or Disable.

If you select enable, the community name must be unique among all valid community 
names or the set request is rejected. If you select Disable, the community name become 
invalid.

To add the currently selected community to the switch, click the ADD button.

To delete the currently selected Community Name, click the DELETE button.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 
example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 
the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.