Netgear M4100-12GF (GSM7212F) - ProSAFE Gigabit L2+ Managed Switch Guía Del Software
•
Static - The port-channel is statically maintained.
•
Dynamic - The port-channel is dynamically maintained.
Switching Commands
125
M4100 Series ProSAFE
Managed
Switches
show port-channel system priority
Use this command to display the port-channel system priority.
Port Mirroring Commands
Port mirroring, which is also known as port monitoring, selects network traffic that you can
analyze with a network analyzer, such as a SwitchProbe device or other Remote Monitoring
(RMON) probe.
analyze with a network analyzer, such as a SwitchProbe device or other Remote Monitoring
(RMON) probe.
monitor session
This command configures a probe port and a monitored port for monitor session (port
monitoring). Use the source interface <slot/port> parameter to specify the interface
to monitor. Use rx to monitor only ingress packets or use tx to monitor only egress packets.
If you do not specify an rx or tx option, the destination port monitors both ingress and
egress packets.
monitoring). Use the source interface <slot/port> parameter to specify the interface
to monitor. Use rx to monitor only ingress packets or use tx to monitor only egress packets.
If you do not specify an rx or tx option, the destination port monitors both ingress and
egress packets.
Term
Definition
Logical Interface
Valid slot and port number separated by forward slashes.
Port-Channel
Name
Name
The name of this port-channel (LAG). You may enter any string of up to 15 alphanumeric
characters.
characters.
Link State
Indicates whether the Link is up or down.
Admin Mode
May be enabled or disabled. The factory default is enabled.
Type
The status designating whether a particular port-channel (LAG) is statically or
dynamically maintained.
dynamically maintained.
Mbr Ports
A listing of the ports that are members of this port-channel (LAG), in slot/port notation.
There can be a maximum of eight ports assigned to a port-channel (LAG).
Device Timeout
For each port, lists the timeout (long or short) for Device Type (actor or partner).
Port Speed
Speed of the port-channel port.
Ports Active
This field lists the ports that are actively participating in the port-channel (LAG).
Load Balance
Option
Option
Local Preference
Mode
Mode
Indicates whether the local preference mode is enabled or disabled.
Format
show port-channel system priority
Mode
Privileged EXEC