Netgear M4100-12GF (GSM7212F) - ProSAFE Gigabit L2+ Managed Switch Guía Del Software
Switching Commands
154
M4100 Series ProSAFE
Managed
Switches
Command example:
(NETGEAR Switch) #show ip arp inspection interfaces
Interface
Trust State Rate Limit Burst Interval
(pps) (seconds)
--------------- ----------- ---------- ---------------
0/1 Untrusted 15 1
0/2 Untrusted 10 10
show arp access-list
Use this command to display the configured ARP ACLs with the rules. Giving an ARP ACL
name as the argument will display only the rules in that ARP ACL.
name as the argument will display only the rules in that ARP ACL.
•
Privileged EXEC
•
User EXEC
Command example:
(NETGEAR Switch) #show arp access-list
ARP access list H2
permit ip host 1.1.1.1 mac host 00:01:02:03:04:05
permit ip host 1.1.1.2 mac host 00:03:04:05:06:07
ARP access list H3
ARP access list H4
permit ip host 2.1.1.2 mac host 00:03:04:05:06:08
IGMP Snooping Configuration Commands
This section describes the commands you use to configure IGMP snooping. The software
supports IGMP Versions 1, 2, and 3. The IGMP snooping feature can help conserve
bandwidth because it allows the switch to forward IP multicast traffic only to connected hosts
that request multicast traffic. IGMPv3 adds source filtering capabilities to IGMP versions 1
and 2.
supports IGMP Versions 1, 2, and 3. The IGMP snooping feature can help conserve
bandwidth because it allows the switch to forward IP multicast traffic only to connected hosts
that request multicast traffic. IGMPv3 adds source filtering capabilities to IGMP versions 1
and 2.
Rate Limit
The configured rate limit value in packets per second.
Burst Interval
The configured burst interval value in seconds.
Format
show arp access-list [<acl-name>]
Mode
Term
Definition