Netgear M4100-12GF (GSM7212F) - ProSAFE Gigabit L2+ Managed Switch Guía Del Software

When the optional argument detail is used, the command shows the global information 
and the information for all Querier-enabled VLANs.

This section describes the commands you use to configure Port Security on the switch. Port 
security, which is also known as port MAC locking, allows you to secure the network by 
locking allowable MAC addresses on a port. Packets with a matching source MAC address 
are forwarded normally, and all other packets are discarded. 

To enable the SNMP trap specific to port security, see 

494.

This command enables port locking at the system level (Global Config) or port level (Interface 
Config)

Global Config

Interface Config

.

Querier Election 
Participate

Indicates whether the MLD Snooping Querier participates in querier election if it 
discovers the presence of a querier in the VLAN.

Querier VLAN 

Address

The IP address will be used in the IPv6 header while sending out MLD queries on this 
VLAN. It can be configured using the appropriate command.

Operational 
Version

This version of IPv6 will be used while sending out MLD queriers on this VLAN.

Last Querier 

Address

Indicates the IP address of the most recent Querier from which a Query was received.

Last Querier 
Version

Indicates the MLD version of the most recent Querier from which a Query was received 
on this VLAN.

Default

disabled

Format

port-security

Mode