Netgear M4100-12GF (GSM7212F) - ProSAFE Gigabit L2+ Managed Switch Guía Del Software

This section describes the commands you use to add, manage, and delete system users. 
The software has two default users: admin and guest. The admin user can view and 
configure system settings, and the guest user can view settings. 

You cannot delete the admin user. There is only one user allowed with 
read/write privileges. You can configure up to five read-only users on 
the system.

Use this command to add a new user to the local user database. The default privilege level 
is

  1. Using the encrypted keyword allows the administrator to transfer local user passwords 
between devices without having to know the passwords. When the password parameter is 
used along with encrypted parameter, the password must be exactly 128 hexadecimal 
characters in length. If the password strength feature is enabled, this command checks for 
password strength and returns an appropriate error if it fails to meet the password strength 
criteria. The optional override-complexity-check parameter disables the validation of 
the password strength.

Session Time

Total time this session has been connected.

Session Type

Shows the type of session, which can be HTTP, HTTPS, telnet, serial, or SSH.

Format

username <name> {password <password> [encrypted 

[override-complexity-check] | level <level> [encrypted 

[override-complexity-check]] | override-complexity-check]} | {level 

<level> [override-complexity-check] password}

Mode

Global Config

Name

The name of the user, up to 32 characters.

Password

The password for the users 8-64 characters. This value can be zero if the no 
passwords min-length command has been executed. The special characters allowed 
in the password include: ! # $ % & ' ( ) * + , - . / : ; < = > @ [ \ ] ^ _ ` { | } ~.

level

Specifies the user level. If not specified, the privilege level is 1. Level 0 can be 
assigned by a level 15 user to another user to suspend that user’s access. Range 
0-15. Enter access level 1 for Read Access or 15 for Read/Write Access.