Netgear M4100-12GF (GSM7212F) - ProSAFE Gigabit L2+ Managed Switch Guía Del Software

Use this command to display configured IAS users and their attributes. Passwords 
configured are not shown in the show command output.

This section describes the commands you use to configure Simple Network Management 
Protocol (SNMP) on the switch. You can configure the switch to act as an SNMP agent so 
that it can communicate with SNMP managers on your network. 

Use this command to set the name and the physical location of the switch and the 
organization responsible for the network. The range for <name>, <loc> and <con> is from 1 
to 31 alphanumeric characters. 

Use this command to add (and name) a new SNMP community. A community <name> is a 
name associated with the switch and with a set of SNMP managers that manage it with a 
specified privileged level. The length of <name> can be up to 16 case-sensitive characters.

Community names in the SNMP community table must be unique. 
When making multiple entries using the same community name, the 
first entry is kept and processed and all duplicate entries are ignored. 

Public and private, which you can rename.

Default values for the remaining four community names are blank.

Format

show aaa ias-users

Mode

Privileged EXEC

Default

none

Format

snmp-server {sysname <name> | location <loc> | contact <con>}

Mode

Global Config

Default

Format

snmp-server community <name>

Mode

Global Config