Netgear M4100-12GF (GSM7212F) - ProSAFE Gigabit L2+ Managed Switch Manual De Usuario
Monitoring the System
400
M4100 Series Managed Switch
7.
Select Monitoring
sFlow
Advanced
sFlow Agent.
The screen displays the agent version and agent address.
•
Agent Version. Uniquely identifies the version and implementation of this MIB. The
version string must use the following structure: MIB Version;Organization;Software
Revision where:
Revision where:
-
MIB Version: '1.3', the version of this MIB
-
Organization: NETGEAR Inc.
-
Revision: 1.0
•
Agent Address. The IP address associated with this agent.
8.
In the Source Interface list, select the management interface to be used for sFlow Agent.
Possible values are as follows:
•
None
•
Routing interface
•
Routing VLAN
•
Routing loopback interface
•
Tunnel interface
•
Service port
By default, VLAN 1 is used as source interface.
9.
Click the APPLY button.
Your changes take effect immediately.
Click the REFRESH button to refresh the screen to show the latest sFlow agent information.
Configure the sFlow Receiver
To configure the sFlow receiver:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
the switch.